British Gas Rc1 Wireless Thermostat Manual

British Gas Rc1 Wireless Thermostat How To Replace The

Pluming from flue terminal Like all condensing boilers it will produce a plume of condensation from the flue terminal in cool weather.

Frost Protection With the gas and electric supplies ON and irrespective of.

IMPORTANT: If the mains electricity and gas services are to be turned off for any long periods during severe weather, it is recommended that the whole system, including the boiler, should be drained to avoid the risk of freezing.

Press the or - once, The temperature is factory set to the minimum 38 C, but can be adjusted to a maximum of 82 C as required, refer to the current temperature diagram 4.

Press PROG to scroll to the current day and The display will then show the EcoStatus screen observe your Trend.

This is confirmed by the Eco indicate the previous weeks Trend.

STEP 1 Press and hold PROG for 5 seconds, the hours symbol will flash.

Day indicator flashing, press PROG button Settings are confirmed and running screen is displayed Year screen displayed, press PROG.

Press - button and hold for 5 seconds your appliance will operate until IMPORTANT: There is no visual indication this feature has the next DHW OFF period, or you.

Reply address IS valid, but is disposable in the event of excessive spam.

For a better experience, please enable JavaScript in your browser before proceeding.

Found this message that Peter (see below) posted back in 2001 and wanted to say a big thank you.

Not sure if you will see this Peter, but just like to say thanks very much for your post.

The batteries died on my wireless thermostat and there were no instructions or manuals from the previous owner of the property.

British Gas Rc1 Wireless Thermostat How To Replace The

My system is labelled British Gas WR1 Wireless System which is the sensor by the boiler and the thermostat is labelled British Gas RC1 Wireless System I came home last night at 00:30 and found the display had died and after spending 15mins working out how to replace the batteries l then spent till 2am browsing the web to find out how you get the two units to talk to one another.

Random button pressing was not working My search proved in vain as l could not come up with any posts to do with RC1 or WR1.

At 7am this morning l just searched for wireless system AND british gas and your post came up.

Ta, Nicholas From: Peter Conway - view profile Date: Thurs, Nov 22 2001 3:50 pm Email: (e-mail address removed) (Peter Conway) Groups: uk.d-i-y Receiver is the wall mounting Wireless Display is the remote thermostat 1.

Make sure both battery compartments are out on the Wireless Display and the screen has gone blank, takes about 2 mins to fade 2.

Push overide button on the receiver once green LED should come on also 4.

Push button 1 followed by 2 and hold them both depressed together Red LED will flash for 2 secs then go out (learn mode) 5.

Release both buttons Red and Green LED should now both be on 6.

Take the wireless display and hold it within sight of the receiver but more than one metre away 7.

Push in the right hand drawer, then the left (it must be done in this order) The red LED on the receiver will flash for 7 secs and then go out.

The green LED will remain on or off depending on the room temperature If the red LED reamins on you need to repeat all of the above If it is still on something is wired incorrectly or broken good luck.

My system is labelled British Gas WR1 Wireless System which is the sensor by the boiler and the thermostat is labelled British Gas RC1 Wireless System etc.

Is it re-badged Honeywell, or something -- Cheers, Roger Please reply to newsgroup.

It may be worth trying to get a user manual for future reference.

I think that Drayton is now part of Invensys.

Cheers, Roger Please reply to newsgroup.

British Gas Rc1 Wireless Thermostat Manual